impregnated graphite bearing
- marque:
- Aobo
- Lieu d'origine:
- Henan, China (Mainland)
Informations de base
Modèle: impregnated graphite bearing
Description du produit
Specifications impregnated graphite bearing
1. ISO9001-2000
2.wear durable and long life
3.resined materials
4.high density
impregnated graphite bearing :
Technical parameter
Product Description
1. About our products :
1) Because of using wafer spring, the force acting on the sealing surface is more uniform , the tracking ability performance
of water seal is improved significantly
2) Lower working height. It can improve seal’s working surroundings.
3) Adhesive structure
2. About material Chosen Principals:
Antifreeze Type: Organic acids series, phosphoric acids series, half-organic acids series.
Speed: Max 6000rpm
Mating ring code : M
Silica series : Mating ring code V
Rubber : NBR
3. Water seals assembly:
1) To use the following tools (fixture)while fitting water seal by pressure. In addition, axial runout of the retainer’s big end face must be
within 0.15mm while taking the shaft of bearing as benchmark.
2) The working height of water seal must be within ±0.1mm around the basic working height .
4. Seal operating :
Dry run (dry friction)should be avoided after mounting water seal as possible. This means water seal must be operate in the filled sealing liquid. If dry run is necessary when testing leakage of water seal, speed should be within 200 rpm.
Detailed Images


1. ISO9001-2000
2.wear durable and long life
3.resined materials
4.high density
impregnated graphite bearing :
Technical parameter
Style |
Axis Dia |
Hole dia of pump shell |
Working height |
H1 |
H1 |
C12A21 |
12 |
30 |
7.6 |
7.6 |
17.5 |
C12D20 |
12 |
30 |
9.1 |
6.3 |
17.5 |
C12N20 |
12 |
30 |
7.6 |
7.6 |
17.5 |
C16120 |
15.918 |
38.1 |
9 |
8 |
19.5 |
C17D21 |
17 |
35 |
10.1 |
8 |
20.5 |
Product Description
1. About our products :
1) Because of using wafer spring, the force acting on the sealing surface is more uniform , the tracking ability performance
of water seal is improved significantly
2) Lower working height. It can improve seal’s working surroundings.
3) Adhesive structure
2. About material Chosen Principals:
Antifreeze Type: Organic acids series, phosphoric acids series, half-organic acids series.
Speed: Max 6000rpm
Mating ring code : M
Silica series : Mating ring code V
Rubber : NBR
3. Water seals assembly:
1) To use the following tools (fixture)while fitting water seal by pressure. In addition, axial runout of the retainer’s big end face must be
within 0.15mm while taking the shaft of bearing as benchmark.
2) The working height of water seal must be within ±0.1mm around the basic working height .
4. Seal operating :
Dry run (dry friction)should be avoided after mounting water seal as possible. This means water seal must be operate in the filled sealing liquid. If dry run is necessary when testing leakage of water seal, speed should be within 200 rpm.
Detailed Images



Groupes de Produits : Produits de graphite de carbone > Bague en graphite et tige
Premium Related Products
autres produits
Produits phares
bague d'étanchéité en graphite de carbonebrosse de carbone matière première graphiteMatériaux composites en fibre de carbonebrosse à charbon force constante printempsbrosse de carbone pour les automobilesbrosse de carbone de cuivre pour l'automobilePalette de carbone graphite pour pompe à videsliding copper contactimpregnated graphite bearingporte-balais pour moteur à courant continuporte-balais électriquesupport de brosse de carbone de cuivre pour le démarreurle troisième collecteur de chemin de ferporte-balais carbone T900 pour locomotivebrosse à charbon DE9000 pour locomotive de trailWind generator grounding brush AG20/LFC554/EG5U S13/F19 MA1147-A-B Carbon brush